Some bonus art - Dan da dan is a show a member put me on to, and now I can't get enough so I have two more art pieces to share.

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 154.86x205mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.4mm and the Actual Depth is 2.5mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Pink Transmission Distance: 8 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 6 unique filaments

Swap Instructions: Start with Black At layer #4 (0.4mm) swap to Dark Blue At layer #7 (0.64mm) swap to Brown At layer #11 (0.96mm) swap to Pink At layer #16 (1.36mm) swap to Beige

Border Only Colors from here until the end. At layer #21 (1.76mm) swap to Jade White for the rest.